Horse Meat and Food Standards (by sarah)

Ok so everyone has been going on about the horse meat in the beef burgers and there have basically been too reactions 1) Oh my god! and 2) hahahahaha.

The first one tends to be along the lines of 'oh no I ate poor horseys!' which for people who eat meat is a bit silly. As has been pointed out they are moaning about the wrong animal being minced up for food. Is a horse really more valuable than a cow?

It could be argued that the horse is more intelligent but the people arguing this will nearly always be bacon eaters too and pigs are really intelligent. The other thing is that this seems horrific to the English but the rest of Europe eat horse! All the time not just when there is a cock up.

People need to assess what they are actually eating rather than burying their heads in the sand. I have friends who don't like the idea of the animals being killed but will not give up meat - they just buy bits that don't look like animal and try not to think about it. Maybe if they thought about it a bit more things like this wouldn't slip in under the radar.

This is interesting as Alaric doesn't even eat fake meat as the idea is alien to him. And this brings me to the point that though I think the reaction is silly, there is still the matter that people where choosing to by minced cow and not minced horse and the choice should be there. Not just for ethical reasons either - now I am not a vegitarian but have issues with cow fat. They make me sick weather in milk or the meat so for me a mistake like this could have serious health consequences. Say I was buying lamb burgers and they happened to contain cow - I would be getting sick and not know why. This is a safety issue.

Also if they have managed to put the wrong meat in there what else has accidently slipped in?

This mess is also going to result in a hell of a lot of food wastage at a time when people are queueing at soup kitchens and food banks are struggling to supply what is needed for all the families in crisis and that makes me want to cry or throttle someone. I know it would seem like a solution to give the patties to them but that would only work if they could be guarenteed safe otherwise you might be making a bad situation worse.

Lets hope it ends up in the bacteria vats for gas and electricity production than in landfill.

Day 2 of making the ladder (by alaric)

Yesterday, I cut out all the bits required to make myself a ladder.

This morning, I set out on foot to visit Machine Mart and Screwfix for some supplies; a set of magnetic welding clamps, some white metal paint for the completed ladder, and these anchor bolts to attach it to the wall. As you can see from the diagram on the box, they just can't wait to be buried in a wall:

Anyway, it's been a long time since I last did any welding (and I've never been great at it), so I started by just tacking a few bits together to check they line up correctly with the wall. I started with the trickiest bit, the angled spacer:

Then I proceeded to drill correctly-sized holes for my anchor bolts into the mounting flanges, using my column drill (a very useful tool). This made a lot of pretty swarf:

Then I started welding the flanges onto the spacers. The new magnetic welding clamps (the red thing in this picture) came in handy here; their function is to accurately hold things at ninety (or forty-five) degree angles:

With all six of the spacers flanged, I could start tack-welding them into place:

My welds on the flat were OK, but my welds inside corners are still pretty ropy; I had to keep chipping the slag off and going over again to fill in gaps. Another problem was that the steel square tubing has rounded corners, meaning that when a spacer has to be welded onto the upright to make a T, two sides of the end of the spacer are to be welded to the curved corner of the upright, making a big gap I had to bridge across somehow. It turns out that surface tension causes the exposed edge of the metal to pull back when it melts, so I had to bodge little slivers of metal left over from the cutting into the gap to stop this happening, resulting in some ugly welds that I may have to grind flat before I paint it - or to make the surfaces I'm going to weld the rungs onto flat enough for them to go on straight! We'll see.

Anyway, having checked the fit against the wall, I could then finish off the welds on all four sides of each junction, completing one side of the ladder. It's intentional that the flanges point in different directions, by the way - they mainly point upwards so the weight of the ladder isn't pulling them away from the wall, except that the one on the angled spacer has to be underneath so I can get in to fit the bolt, and the top one is underneath so the anchor bolt hole isn't too near the top of the wall:

At that point I ran out of time. It won't take me too long to assemble the second side as I already have all the flanges welded onto the spacers (which was quite time-consuming), and I can clamp it all onto the existing side to get the alignment correct without all the cross-checking and measuring I had to do the first time.

After that, I'll need to weld the rungs in place, tidy up the welds, scrub it down with a wire brush and sandpaper to clean off all the welding grime, degrease it with white spirit, and paint it.

Then I need to figure out how I'm going to get it into the wall! I'll need to somehow hold it in place while I mark out the drill holes, which might be tricky without an assistant. Then I have to try to drill the holes where the marks actually are (the bane of my life is carefully marking out a wall, starting to drill, and the bit hitting a stone and suddenly meandering half a centimetre off centre - then having to try and jam a screw in nonetheless, as whatever I'm screwing to the wall has holes in places that can't move to match).

After that, holding it up to the wall and slipping in the anchor bolts should be easy - then tighten them up and I'm done! They have a tightening torque recommendation on the box, so I'll finally get to use my torque wrench, and not be left wondering if I've tightened them enough or risking cracking the wall by over-tightening (which has been a concern with previous anchor bolt expiditions).

Continue to day 3...

Pain, Peceptions and What Not (by sarah)

As those who follow me on facebook, twitter, text message or in the flesh will have detected I am in pain at the moment - I am having a flare up not just with my back and shoulder but also with my hands. Not surprising really as it is pregnancy hormone that kept these pains at bay for the last few years - instead giving me the pelvic issues. My hands are not working brilliantly but they have also been a lot worse in the past.

They are not completely useless lumps of rubber like they were at the end of my degree.

But they are weak, I can not open the baby's beaker so we need three of them so I don't have to refill whilst Al is at work. I can't open cans nor chop veg or lock/unlock the door. We have ways around most of this and those we don't we are working on.

But it is always depressing but I am being kept in ok spirits by Alaric and friends.

I am also awaiting the stuck coil to be removed and the pains associated with that which is stressing me out - I just don't like the idea of it being there at all now plus it is now spiking me. I'm trying not to be negative about things but I am being overly persermistic about stuff. Pain killers make me thick, pain makes me thick, I feel thick and dull and fat and boring to be quiet honest.

But again I have ways around this so it isn't really that bad - I just need to moan about it. Hopefully I can stop boring everyone with it all now!

Also I had injections in the top of my spin in 2003 to help with inflammation and pain and stuff - it feels like these have worn off? Is that possible? I was hoping to get longer out of them as I was told I could only ever have the injections three times in my life.

Day 1 of making the ladder (by alaric)

This weekend, I am attempting to make a fixed ladder, mounted to the wall of my workshop so I can fix the roof more easily.

First, I had to tidy up in the workshop to make room. I bought a set of four folding chairs for guests which are rather in the way (the chairs, not necessarily the guests), So I screwed a few bits of scrap wood up between the beams to store them:

See all that damp on the ceiling, by the way? That is the enemy! Eradicating that is the long-term goal of this whole mission.

With the chairs out of the way, I could get on with the task at hand. Here's the bit of wall where the ladder will go:

And here's the pile of steel I ordered from Hindleys to make it from:

The ladder is being made mostly from 1" square steel tubing, which needs to be cut into bits of various lengths with my trusty angle grinder. Here's the rungs (longer parts) and the spacers that will join it to the wall:

However, for extra strength and extra not-having-a-sharp-corner-ness, at the bottom it will be joined to the wall by an angled spacer on each side. The spacer will be at forty-five degrees to the vertical (and to the horizontal, thanks to the magic of maths), so I need to cut twenty two and a half degree angles onto the bottoms of the ladder uprights, like so:

Also, I needed to cut out two spacers with twenty two and a half degree angles at one end (to mate with the uprights) and forty five degree angles at the ends which will mount onto the wall, bringing my pile of various lengths of steel tube up to this:

Where the tubes need to attach to the wall, I'm going to weld them to flat steel plates, which will be drilled for the bolts that join them to the wall. All of the tube ends I've cut will be welded, so the fact that they're rough angle-grinder cuts doesn't matter, but these edges will be exposed, so the fact that they are nasty and burred offends me:

But a quick run along the bench grinder each has given them nice clean edges:

Sarah turned up and took a picture of me, just as I was finishing. Check out my lovely protective clothing - I take my safety seriously when dealing with forces that can make metal flow like honey:

Finally, I measure out the layout of the angled spacer, to check I'd done my maths correctly to make it the right length to produce a 30cm spacing, to match the straight spacers, and that the angles were right:

Tomorrow, I will go out shopping to buy some anchor bolts to mount it to the wall (I can't drill the holes in the plates until I know the diameter required), welding magnets so I can make sure the angles are exact as I weld it together (I don't want a wonky ladder), and some metal paint so it won't rust when it's installed - then it's time to start welding. I plan to start by making the sides with the angled and straight spacers so I can check they align perfectly by placing them one on top of the other, before welding the rungs in between them.

Continue to day 2...

Snow Garden (by sarah)

More snow fell after I took the pics and I regret not having gone out with the birthday money sooner and gotten my camera as it ment I was restricted to the half an hour of Al getting ready for work and his smart phone! However I did discover that the broken camera still records film ok so I did take some vids of the girls which I will attempt to process later on!

I made Al stop to take a pic of him as he left for work but alsa the camera went with him!

But here is what I got! None of the kids paying sadly 🙁 Though it turned out Mary hated the snow where as Jean spent hours out in the garden making snow angels and just walking around in it, sticking it too the walls etc... I made soup out of frozen veg in the freezer, and then Mary went down for her nap so I ended up building a snow man with Jean and having a snow fight where we both got covered!